NOTE: Each belt gets 7 holes punched into the tail. The middle of the 7 is the Center Hole. Distance to that hole is the Center Hole Measurement. Tail length beyond the CHM is automatically applied.
Quick Method:
Most people know their pant’s size. Just pick that size for your belt.
Behind the scenes, we add 3 inches to that size for the center hole measurement.
Example:
- You wear size 34 pants
- You should pick size 34 belt
- We cut it based on a 37 inch center hole measurement (add 3 inches).
Why: Pant sizes are smaller than actual waist size and we want you to have a belt that fits.
but….
Pant’s sizes vary by designer, so we always recommend the PRO method for best fit.
PRO Method:
1. Grab a belt you wear
2. Measure it according to the picture below
3. Do the math (easy math) to pick the best size
Example:
PRO measurement = 38 inches to center hole
Subtract 3 inches (we auto add 3 inches to pant’s size)
38 inches minus 3 inches = 35 inches
Since 35 falls between 34 and 36, round up to 36 inches
Select size 36 belt!
The belt may not lay straight, that’s OK. Do your best to straighten it before measuring.
Choosing a selection results in a full page refresh.
